کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10136098 | 1645679 | 2019 | 16 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Numerical investigation of thermal characteristics of spray cooling with minimum quantity lubrication in milling process
ترجمه فارسی عنوان
بررسی عددی ویژگی های حرارتی خنک کننده اسپری با حداقل مقدار روانکاری در فرآیند آسیاب
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مکانیک محاسباتی
چکیده انگلیسی
This study explores the cooling performance associated with spray cooling with minimum quantity lubrication (MQL) in milling of Ti6Al4V using tungsten carbide (WC) cutting tool. Vegetable oil is used as a cutting fluid, and it impacts the cutting zone. A numerical model using sliding mesh and discrete phase model (DPM) is developed to calculate the flow field and the temperature distributions in both WC and Ti6Al4V subjected to conjugated heat transfer. The effect of spray angle relative to the feed direction on cooling performance is examined by analyzing the flow field and droplet behavior when nozzle is oriented to the tool or tool flute. The result shows that the temperature of both WC and Ti6Al4V for 0 and 90° of spray angle is lower than that for 45° of spray angle. However, 90° of spray angle is not suitable for lubrication purpose in milling process since MQL droplets hardly penetrate into the cutting zone.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Mathematical Modelling - Volume 65, January 2019, Pages 137-147
Journal: Applied Mathematical Modelling - Volume 65, January 2019, Pages 137-147
نویسندگان
Kim Seong Hoon, Lee Sang Won, Han Sangmok, Kim Sung-Min,