Modeling of human model for static pressure distribution prediction

• A whole and detailed human FE model to predict pressure distribution is proposed.
• The computation of segment mass revealed that this human model is reasonable.
• Validation study shows the model can realistically predicts pressure distribution.
• Interaction between human body and automobile seat is investigated.

Vehicle comfort, the key factor that influences the purchase of automobile products, is becoming increasingly important. However, the processes of traditional empirical and experimental approaches to design a new, more comfortable seat is complicated, time consuming and costly. The finite element method could facilitate, accelerate and economize this process. In the present work, a complete human FE model is established based on the Hybrid III dummy, the appropriate element size of 10 mm was ascertained. The body segment mass was verified by comparing segment mass percentages obtained from this model with previous data. The further validation study of the human model was achieved via the human pressure distribution experiments over human-rigid seat interaction under three postures, the validation reveals that the simulation results agree well with the experimental data. On this basis, the human model was applied to predict the interactions between human body and an automobile seat, then the contact pressure distribution, additional information about the contact shear stresses distribution and stress distribution within the soft tissue were obtained through simulation. The human model presented in this paper can reflect the interaction between human body and automobile seat precisely.Relevance to industryThe results deduced that the model is capable of realistically predicting pressure distribution, the present model allows the evaluation of seating comforts in a virtual phase of seat development, and the study can be taken as reference for vehicle seat design and biomechanical evaluation.