کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1473109 1510123 2016 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Synthesis of 0.64Pb(Mg1/3Nb2/3)O3–0.36PbTiO3 ceramic near morphotropic phase boundary for high performance piezoelectric, ferroelectric and pyroelectric applications
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
Synthesis of 0.64Pb(Mg1/3Nb2/3)O3–0.36PbTiO3 ceramic near morphotropic phase boundary for high performance piezoelectric, ferroelectric and pyroelectric applications
چکیده انگلیسی


• PMN–PT ceramic was prepared near MPB via the two steps columbite precursor method.
• Formation of pure perovskite phase was confirmed by XRD and Raman spectroscopy.
• Excellent dielectric response with high Tm (∼210 °C at 1 kHz) was obtained.
• High piezo- (d33 ∼ 490 pC/N) and pyro- (p ∼ 2739.2 μC m−2 °C−1) coefficients were achieved.
• Well-shaped and fatigue-free P–E hysteresis loops at various temperatures were traced.

A near MPB composition of 0.64PMN–0.36PT ceramic has been synthesized by solid-state reaction technique using columbite precursor. Sintering at 1030 °C resulted in a single perovskite phase with tetragonal structure having uniform and dense microstructure as revealed by powder XRD, Raman spectroscopy and FESEM analyses. An excellent dielectric response was obtained with room temperature dielectric permittivity value of 142 and high-phase transition temperature (Tm) of 210 °C at 1 kHz. A huge value of piezoelectric charge coefficient (490 pC/N) was obtained, which shows potential of PMN–PT for piezoelectric device applications. Well-shaped and fatigue-free P–E hysteresis loops over a wide temperature range of 30–230 °C were traced. A very large value of pyroelectric coefficient (p ∼ 2739.2 μC m−2 °C−1) was obtained.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Asian Ceramic Societies - Volume 4, Issue 3, September 2016, Pages 337–343
نویسندگان
, , , , ,