Performance Analysis of Process Parameters on Machining Titanium (Ti-6Al-4V) Alloy Using Abrasive Water Jet Machining Process

Owing to its light weight and corrosive resistant, Titanium (Ti-6Al-4V) alloy is mainly utilized in fabricating medical device applications. Since it has high strength, it is very difficult to machine alloy using conventional machining. In the present study, an endeavor has been made to machine titanium alloy using AWJM process. Since the process involves with less heat affect zone and higher material removal, it is possible to enhance machinability of workpiece. It has attempted to find the influence of process parameters on surface roughness and topography for enhancing the process. It has been observed that the abrasive flow rate and standoff distance has the most significant role on determining surface quality.