کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
221660 464263 2016 13 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Comparative study on hydrolysis of oils by lipase immobilized biocatalytic PS membranes using biphasic enzyme membrane reactor
ترجمه فارسی عنوان
بررسی مقایسه ای در مورد هیدرولیز روغن توسط لیپاز بیوتیک کاتالیزوری غشاء PS با استفاده از راکتور غشای دوفازی آنزیم
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی مهندسی شیمی (عمومی)
چکیده انگلیسی


• Biphasic EMR was used for study on hydrolysis of olive, palm & castor oil.
• The enzymatic process of hydrolysis of oils & fats is a green process.
• It has advantages over traditional processes as resembles natural pathways.
• Candida rugosa lipase was entrapped in PS membranes by ultrafiltration technique.
• High immobilization yield was achieved after optimizing different parameters.

In the present study the hydrolysis of olive, palm and castor oil had been carried out to yield valuable free fatty acids by using immobilized Candida rugosa lipase. This study was designed to achieve high yield of lipase immobilization by investigating different factors (applied pressure, time, and lipase concentration) for ultrafiltration process of immobilization. A biphasic enzyme membrane bioreactor was fabricated having aqueous-organic two-phase system with lipase immobilized polysulfone. Effect of operating variables on the performance of this biphasic EMR was investigated with the hydrolysis of olive oil, palm oil and castor oil.It was found that the optimal conditions for highest degree of hydrolysis (%) were temperature 37 °C, pH 8.0, at concentration of 0.05 M in iso-octane and initial reaction time was 24 h. In optimal conditions, degree of hydrolysis for olive oil, palm oil and castor oil was 38.5%, 35.4% and 21.2% respectively. Reusability feature was also studied and only ∼20% decrease in activity was observed after five cycles.

Figure optionsDownload as PowerPoint slide

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Environmental Chemical Engineering - Volume 4, Issue 2, June 2016, Pages 1797–1809
نویسندگان
,