کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
283856 509118 2016 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Eco-friendly insulation material production with waste olive seeds, ground PVC and wood chips
ترجمه فارسی عنوان
تولید مواد عایق سازگار با محیط زیست با دانه های ضایعات زیتون ، پی وی سی زمینی و تراشه های چوب
کلمات کلیدی
دانه زیتون؛ واحد وزن؛ عایق های حرارتی. ضریب هدایت حرارتی
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی

Insulation materials containing waste olive seeds, ground PVC and wood chips is proposed.Technical properties of all samples are above the values ​​required by the standard.These materials will contribute to the protection of the environment.These wastes can be found abundantly everywhere and the proposed insulation material can be produced economically.

The waste of the olive oil production process has been a notably important pollution source in Mediterranean countries, such as Italy, Spain, Greece, and Turkey. In recent years, the environmental impact of this type of waste created a rich source, and researchers have been focusing on the treatment of olive oil mill waste. Furthermore, olive seed, waste PVC and wood chips are wastes that cause significant detrimental effects on the environment, following the production stage.In this study, insulation materials containing waste olive seeds, ground PVC, wood chips, plaster and epoxy were produced, and their properties were investigated. The unit weight, water absorption rate, ultrasonic penetration velocity, thermal conductivity coefficient, compressive and flexure strengths properties of the samples were determined. It can be seen from the results that most properties have improved with the addition of the additives,The unit weights of the samples and their thermal conductivity coefficients decreased, thanks to olive seeds, PVC and wood chips. However, the decrease in the unit weight was accompanied by an increase in the water absorption and a decrease in the flexural and compressive strengths of the samples, luckily remaining at acceptable levels for the additive rates in the samples.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Building Engineering - Volume 5, March 2016, Pages 260–266
نویسندگان
, ,