Modeling the heat exchanges between a datacenter and neighboring buildings through an underground loop

• An underground loop connected to buildings can help the datacenters thermal management.
• The flow configuration can be determined to optimize the heat exchanges.
• The developed analytical model is in excellent agreement with numerical simulations.

This paper introduces a methodology to the design of an underground heat exchanger connecting a datacenter − the heat source − to office buildings − the heat sinks. The underground network is a loop through which a baseline mass flow rate of water is circulating, while the buildings heat pumps are directly connected to the loop. Different configurations are examined, based on maximum heat transfer rates and minimum pumping power. The flow system configuration is determined with the objective of distributing to the office buildings the enthalpy dumped by the datacenter to the system.