|کد مقاله||کد نشریه||سال انتشار||مقاله انگلیسی||ترجمه فارسی||نسخه تمام متن|
|4921151||1362942||2017||5 صفحه PDF||سفارش دهید||دانلود کنید|
- Two curing methods for the pre-preg on the superconducting busbar are researched.
- Vaccum bag and silicone rubber is used for pre-preg curing as complement of VPI in fusion filed.
- The results of mechanical properties and void content is described and discussed.
Pre-preg material has been widely-used in the industry of the aerospace, the wind power, which has many advantages on manufacture process, and can be chosen as an effective complementary insulation method for the Wet-winding and Vacuum Pressure Impregnation technology in the field of superconducting fusion magnets. ASIPP undertaken many engineering tasks on the superconducting coil and busbar design and manufacture for the large fusion device, the pre-preg material and the relevant curing technology were researched as a new method for the high voltage potential components in ITER Feeders, such as the busbars and current leads. Two types of Chinese industrial glass fiber pre-preg insulation composite material were studied and pre-qualified using vacuum bag and silicone rubber assistance technique in ASIPP. The mechanical properties including the ILSS and UTS at 77Â K, and void content of this composites were measured and discussed in this paper in detail.
Journal: Fusion Engineering and Design - Volume 114, January 2017, Pages 13-17