Computational study of unsteady mixed convection heat transfer of nanofluids in a 3D closed lid-driven cavity

Mixed heat convection of three-dimensional unsteady flow of four different types of fluids in a double lid-driven enclosure is simulated by a two-phase mixture model in this project. The cubic cavity with moving isothermal sidewalls has uniform heat flux on the middle part of the bottom wall, and the other remaining walls forming the enclosure are adiabatic and stationary. The relevant parameters in the present research include Reynolds number Re (5000-30,000), nanoparticle diameter (25 nm-85 nm), and nanoparticle volume fraction (0.00-0.08). In general, remarkable effects on the heat transfer and fluid patterns are observed by using nanofluids in comparison to the conventional fluid. Different types of nanofluids or different diameters of nanoparticles can make pronounced changes in the heat convection ratio. In addition, increasing in either volume fraction of nanoparticles or Reynolds number leads to increasing in the Nusselt number, fluctuation kinetic energy and root mean square velocity of the fluid in the domain. It is also found that both URANS and LES methods have shown good performance in dealing with unsteady flow conducted in this project. However, the comparisons have elucidated clearly the advantages of the LES approach in predicting more detailed heat and flow structures.