Two-phase discharge from a stratified region through two horizontal branches with centerlines falling on an inclined plane

The main objective of this study was to obtain new experimental data for conditions not previously tested for discharging two-phase flow through two 6.35 mm diameter branches with centerlines falling in an inclined plane. The present results are relevant to many industrial applications including headers and manifolds, multichannel heat exchangers and small breaks in horizontal pipes. In the experimental investigation, the critical heights for the onsets of liquid and gas entrainment (OLE and OGE, respectively) were obtained, analyzed and correlated for two different branch spacings and two different angles between the branches. For each combination of branch spacing and angle between the branches, a wide range of Froude numbers was used. Two-phase mass flow rate and quality results were also obtained and analyzed for a range of interface heights for 16 different combinations of branch spacing, inclination angle, test section pressure and pressure drop across each branch. New empirical correlations were developed to predict the dimensionless mass flow rate and quality. The new correlations show good agreement with the present data and with previous correlations.