The development of a dynamic single effect, lithium bromide absorption chiller model with enhanced generator fidelity

Single effect, lithium bromide absorption chillers offer the ability to utilize low-pressure steam to produce chilled water for satisfying various comfort cooling needs. Previous attempts have been made to characterize dynamic and steady-state absorption chiller operation. Though these models perform adequately, they are based on hot water driven absorption chillers. Commercially available absorption chillers often can run on both hot water and low-pressure steam. In this paper, the mathematical framework for a dynamic single effect, lithium bromide absorption chiller model capable of using low-pressure steam is presented. The transient thermodynamic FORTRAN model is grounded on mass, energy, and species balances, and builds on prior modeling efforts. Well-known correlations for heat transfer coefficients are used to describe both tube-side and shell-side heat transfer rates in each primary chiller component. To account for the absorption chiller unit receiving steam, a heat transfer model for condensation inside horizontal tubes based on distinct internal condensation flow regimes is incorporated within the generator. This heat transfer model is used with two-phase flow pressure drop equations to establish steam temperature, quality, and pressure along the generator tube bundle. Steam consumption trends are established as a function of fluctuating external conditions. These trends reasonably align with information made available online by the manufacturer, though some deviation does occur at low chiller capacities and cooling water temperatures. Additionally, the transient response of internal and external parameters from a step increase in heat input supplied to the generator mimics results of other dynamic absorption chiller models found throughout literature.