Effects of hardness of steel on ceramic armour module against long rod impact

- Increasing hardness of steel backing layer in a ceramic armour module correlated to enhanced ballistic performance.
- Increasing hardness of steel cover plate in a ceramic armour module did not improve ballistic performance.
- Mechanism of long rod projectile penetration into ceramic armour modules was elaborated.

An experimental study and hydrocode simulation was conducted to investigate the correlation between hardness of steel and the ballistic performance of steel-encapsulated SiC armour modules against long rod impact. The armour module design composed of a SiC tile in confinement within 10 mm backing and 5 mm cover plates, which were made of AISI 4340 steel with varying hardnesses between HRC 30 to 50. The armour modules were subjected to normal impact by conical tungsten alloy long rods of 8.3 mm diameter and 115 mm length, at a nominal striking velocity of 1.25 km/s. A witness block of AISI 4340 steel was placed behind the armour module to capture the residual projectile. Failure analysis of the armour modules and the measurement of residual penetration in the witness blocks were applied to characterize ballistic performance of the ceramic armour modules. The different modes of failure of the backing plate and its influence on ballistic performance of the module were verified through visual inspection of test modules and analysis of high speed videos. Hydrocode simulation of the experiments using LS-DYNA was carried out to model the penetration and failure processes that occurred in the armour modules. The Johnson Cook model was applied in simulation of the steel confinement, accounting for the influence of hardness on JC model parameters. Results showed that increasing hardness of the backing enhanced the performance of the module while cover plate hardness had no influence within the range of hardnesses tested. This study paves the way for future studies to further understand the influence of steel hardness on the ballistics performance of steel-encapsulated silicon carbide (SiC) armour modules.