کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5027539 1470635 2017 5 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Mass-Transport Process in Subcritical Crack Growth in Carrara Marble
ترجمه فارسی عنوان
فرایند حمل و نقل جرم در رشد کراک فوق بحرانی در سنگ مرمر کارارا
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی (عمومی)
چکیده انگلیسی

Information of subcritical crack growth in rock is essential to ensure the long-term integrity of a rock mass surrounding various structures and various architectures made of rock materials. In this study, using Carrara marble as a rock sample, subcritical crack growth was investigated experimentally. Especially, the load relaxation method of the double-torsion test was used for all measurement under controlled temperature and relative humidity. It was shown that the crack velocity in air increased with increasing temperature. The crack velocity increased with increasing the stress intensity factor. However, we found a region where the increase of the crack velocity with stress intensity factor was not significant. It is also found that the crack velocity in this region increased with temperature. This is similar to Region II of subcritical crack growth observed in glass in air. The Region II in glass is controlled by the mass-transport to the crack tip. In the case of rock, the transport of water to crack tip is important. In general, Region II is not observed for subcritical crack growth in rock materials, because rocks contain water. Since the porosity of Carrara marble is very low, the contained amount of water is also very small. Therefore, it is considered that Region II is observed in Carrara marble. Since the crack velocity increased in the environment with higher temperature, it is concluded that the condition with low temperature in air is desirable for the long-term integrity of a carbonate rock mass. Additionally, it is concluded that mass-transport is an important process for subcritical crack growth in rock with low porosity.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Procedia Engineering - Volume 191, 2017, Pages 525-529
نویسندگان
, , , ,