Amperometric triglyceride bionanosensor based on nanoparticles of lipase, glycerol kinase, glycerol-3-phosphate oxidase

The nanoparticles (NPs) aggregates of lipase from porcine pancreas, glycerol kinase (GK) from Cellulomonas sp. and glycerol-3-phosphate oxidase (GPO) from Aerococcus viridanss were prepared by desolvation and glutaraldehyde crosslinking and functionalized by cysteamine. These enzyme nanoparticles (ENPs) were characterized by transmission electron microscopy (TEM) and Fourier transform infra red (FTIR) spectroscopy. The functionalzed ENPs aggregates were co-immobilized covalently onto polycrystalline Au electrode through thiolated bond. An improved amperometric triglyceride (TG) bionanosensor was constructed using this ENPs modified Au electrode as working electrode. Biosensor showed optimum current at 1.2 V within 5s, at pH 6.5 and 35 °C.A linear relationship was obtained between current (mA) and triolein concentration in lower concentration range,10-100 mg/dL and higher concentration range, 100-500 mg/dL. Limit of detection (LOD) of bionanosensor was 1.0 μg/ml. Percent analytical recovery of added trolein (50 and 100 mg/dL) in serum was 95.2 ± 0.5 and 96.0 ± 0.17. Within and between batch coefficients of variation (CV) were 2.33% and 2.15% respectively. A good correlation (R2 = 0.99) was obtained between TG values in sera measured by present biosensor and standard enzymic colorimetric method with the regression equation: y= (0.993x + 0.967). ENPs/Au electrode was used 180 times over a period of 3 months with 50% loss in its initial activity, when stored dry at 4 °C.