Material PropertiesRole of PTFE paste fibrillation on Poisson's ratio

Polytetrafluoroethylene (PTFE) flat profiles were extruded using slit dies, which promoted orientation of fibrils in two directions (2-D). Uniaxial tensile experiments were performed on the collected extrudates using the Sentmanat Extensional Rheometer (SER) at different temperatures and Hencky strain rates to determine the mechanical properties of the material. A nonlinear viscoelastic model developed by Matsuoka was found to describe well the transient tensile results using Poisson's ratio as a parameter. Polarized Raman Spectroscopy was also used to gain additional information on the degree of fibril orientation at different locations both along and across the width and length of the extrudates. Results of the Raman spectra were found to be in agreement with the fibril structure/morphology obtained from SEM micrographs. The compressibility of the extrudates upon stretching was studied by measuring the relative density. The results are modeled using a simple equation including the elastic strain recovery coefficient (κ) and Poisson's ratio.