کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
538871 1450317 2016 5 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
The fabrication of carbon nanotube electronic circuits with dielectrophoresis
ترجمه فارسی عنوان
ساخت مدارهای الکترونیکی نانولوله کربنی با دی الکتر فوروز
موضوعات مرتبط
مهندسی و علوم پایه مهندسی کامپیوتر سخت افزارها و معماری
چکیده انگلیسی


• Single-walled carbon nanotube mesh networks can be aligned and deposited with dielectrophoresis.
• Electronic circuits can be fabricated using the p-type carbon nanotube field-effect transistors.
• The dielectrophoresis method could be used for the wafer-scale fabrication of carbon nanotube-based nanoelectronics.

Single-walled carbon nanotubes (SWCNTs) are used widely in fabricating nanoelectronic devices because of their unique electrical properties. In this paper, we report the fabrication of carbon nanotube field-effect transistors (CNTFETs)-based inverter and ring oscillator electronic circuits using the dielectrophoresis (DEP) method. The electrical property of fabricated CNTFET-based devices was measured. The CNTFET-based inverter shown electrical transfer characteristics, while the CNTFET-based ring oscillator demonstrated oscillation characteristics, denoting that the CNTFET-based circuits can function well for the application of electronic circuits. The DEP-based fabrication method is scalable, and could be used for the wafer-scale fabrication of carbon nanotube electronic circuits.

Figure optionsDownload as PowerPoint slide

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Microelectronic Engineering - Volume 164, 1 October 2016, Pages 123–127
نویسندگان
, , , , ,