کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5439155 1398192 2017 17 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Fabrication of dense zirconia-toughened alumina ceramics through a stereolithography-based additive manufacturing
ترجمه فارسی عنوان
ساخت ظروف سرامیک آلومینا از زیرکونیا تجمیع شده با استفاده از یک افزودنی بر اساس استریولیتوگرافی
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد سرامیک و کامپوزیت
چکیده انگلیسی
We report a novel approach to fabricate dense zirconia-toughened alumina (ZTA) ceramics with excellent properties via an additive manufacturing process based on stereolithography. The XRD patterns show the ZTA sample consists of α-Al2O3 and t-ZrO2 with the dominance of α-Al2O3. The zirconia grain with the average size of 0.35 µm is small enough to trigger the toughening behavior of zirconia in the ZTA. The prepared ceramics showed a density, Vickers hardness, bending strength, and fracture toughness of 4.26 g/cm3, 17.76 GPa, 530.25 MPa, and 5.72 MPa m1/2, respectively. These properties are comparable to those for ceramics obtained through conventional ceramic processing.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Ceramics International - Volume 43, Issue 1, Part B, January 2017, Pages 968-972
نویسندگان
, , , , , , , , ,