کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5457490 | 1515819 | 2018 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Novel Co-Ti-V-base superalloys reinforced by L12-ordered γⲠphase
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The influences of alloying elements Al and Ni to a Co-Ti-V master alloy on microstructures, phase stabilities and high-temperature mechanical properties have been investigated. A two-phase microstructure γ/γʹ with ultrahigh γʹ volume fraction was designed in the Co-Ti-V (master alloy), Co-Ti-V-Al (Al-modified) and Co-Ti-V-Ni (Ni-modified) alloys. Al shows a slight tendency to partition into γʹ, while Ni exhibits almost equal distribution between the γ and γʹ phases. Al is found to increase the volume fraction and solvus temperature of γʹ. The solvus temperatures of γʹ in the master alloy, Al-modified and Ni-modified alloys exceed that of Co-9Al-9W alloy (1000 °C) by 91, 112 and 82 °C, respectively. The flow stresses of the designed alloys exhibit an anomalous positive dependence on temperature rising from 600 to 750 °C. The strengths of the master alloy and Ni-modified alloys are not only higher than that of traditional Co-base superalloy MAR-M 302 at the temperature ranging from 700 to 1000 °C, but also comparable with that of the commercial Ni-base superalloy IN-939 between 850 and 1000 °C. In conclusion, the present Co-Ti-V-base alloys reinforced by γʹ are suggested as potential candidates for high-temperature utilizations.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Intermetallics - Volume 92, January 2018, Pages 126-132
Journal: Intermetallics - Volume 92, January 2018, Pages 126-132
نویسندگان
J.J. Ruan, X.J. Liu, S.Y. Yang, W.W. Xu, T. Omori, T. Yang, B. Deng, H.X. Jiang, C.P. Wang, R. Kainuma, K. Ishida,