کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5467042 | 1518417 | 2017 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Reduction of noise during milling operations
ترجمه فارسی عنوان
کاهش سر و صدا در طول عملیات فرز
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
فرزکاری، انتشار آکوستیک، سر و صدا،
ترجمه چکیده
با افزایش عملکرد عملیات ماشینکاری، سطح سر و صدا به یک مشکل بهداشتی و ایمنی شغلی تبدیل شده است. شناسایی منابع اصلی انتشار سر و صدا در هنگام تراش یک جزء آلومینیوم مورد تجزیه و تحلیل قرار گرفت. یک مرکز ماشینکاری، مجهز به میکروفون، در یک اتاق بیخوابی نصب شده است. تست نشان داد که سختی بخشی مهمترین پارامتر است. سرعت برش، تغذیه و عمق برش محوری به افزایش میزان فشار صدا با افزایش انرژی ضربه کمک می کند، در حالی که عمق شعاعی برش یک پارامتر حساس نیست. علاوه بر این، قطر آسیاب و همچنین عدم تعادل آن باید محدود باشد.
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
With the increase in performance of machining operations, noise levels have become an occupational health and safety problems. Identification of the main sources of noise emission when milling an aluminium component was analyzed. A machining centre, equipped with microphones, was installed in an anechoic chamber. Testing demonstrated that the part's stiffness is the most critical parameter. Cutting speed, feed and axial depth of cut tend to increase sound pressure level by increasing the impact energy, whereas radial depth of cut is not a sensitive parameter. Moreover the diameter of mills, as well as their unbalance, should be limited.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Journal of Manufacturing Science and Technology - Volume 18, August 2017, Pages 39-44
Journal: CIRP Journal of Manufacturing Science and Technology - Volume 18, August 2017, Pages 39-44
نویسندگان
J. Rech, F. Dumont, A. Le Bot, P.J. Arrazola,