In situ Raman studies on cement paste prepared with natural pozzolanic volcanic ash and Ordinary Portland Cement

- In situ Raman Spectroscopy used to examine the hydration process of OPC volcanic ash.
- The effect of volcanic ash particle size on the cement paste hydration behavior were examined.
- Free water found to increase with increasing the particle size and concentration of volcanic ash.

Raman Spectroscopy was used to track the free water and the cementitious gel phases when Ordinary Portland Cement (OPC) and tricalcium silicate (C3S) were partially substituted by natural pozzolanic volcanic ash. Two different particle sizes of volcanic ash (VA), (namely 17 and 6 μm) were each used to substitute 10%, 30% and 50% of OPC and C3S by weight. Particle size and concentration of VA significantly affected the hydration behavior of cement paste by influencing the water dynamics during the course of hydration. Increase in concentration of VA also led to an increase in “free water” during the course of hydration. Calcium silicate hydrate (C-S-H) phases along with calcium/magnesium based zeolites were detected as the concentration of volcanic ash increased in the mix. This work shows that Raman spectroscopy is a powerful tool to examine the hydration process when Portland cements are substituted by volcanic ashes of different sizes.

Dynamic time tracking of free water during first 48 h of hydration of Portland cement paste using Raman Spectroscopy.192