Bismuth oxide nanorods based immunosensor for mycotoxin detection

- Use of Bismuth oxide nanorods for aflatoxin B1 detection.
- It improved the electrochemical properties.
- First report on nBi2O3 for mycotoxin detection.

We report results of the studies relating to fabrication of an efficient immunosensor based on bismuth oxide nanorods (nBi2O3), electrophoretically deposited onto indium-tin-oxide (ITO) coated glass substrate. This immunosensor was fabricated by immobilization of anti-aflatoxin monoclonal antibodies (Ab-AFB1) and bovine serum albumin (BSA) for aflatoxin B1 detection. The structural and morphological studies of n-Bi2O3 have been carried out by XRD, UV-vis spectrophotometer; SEM, AFM and FTIR. It was found that the nBi2O3 provided improved sensing characteristics to the electrode interface in terms of electroactive surface area, diffusion coefficient, charge transfer rate constant and electron transfer kinetics. The results of electrochemical response studies of this BSA/Ab-AFB1/nBi2O3/ITO immunosensor revealed good linearity in the range of 1-70 ng dL− 1 with low detection limit of 8.715 ng/dL, improved sensitivity of 1.132 μA/(ng/dL cm− 2), regression coefficient R2 of 0.918 and reproducibility of > 11 times. The association constant for the BSA/Ab-AFB1/nBi2O3/ITO immunosensor was determined as 7.318 ng/dL.