Flame spread between two droplets of different diameter in microgravity

This research investigates the flame-spread characteristics between two droplets, Droplets A and L, of different diameter. n-Decane droplets are placed at intersections of 14 µ SiC fibers. The flame spread from Droplet A to Droplet L was observed in microgravity. The results show that the flame-spread rate decreases with an increase in the droplet spacing or the initial diameter of Droplet L for a constant initial diameter of Droplet A. The flame-spread time is approximated as the summation of the thermal conduction time from the flame around Droplet A to Droplet L and the heating time of Droplet L, which is the time required to activate the vaporization of Droplet L. Both the thermal conduction time and the heating time of Droplet L increase with the droplet spacing. The latter also linearly increases with the squared initial droplet diameter of Droplet L. The results suggest that the ratio of the heating time of Droplet L to the thermal conduction time depends roughly on the droplet diameter of Droplet L alone for a constant initial diameter of Droplet A. The flame-spread-limit droplet spacing gradually decreases with an increase in the initial droplet diameter of Droplet L and increases sharply with the initial droplet diameter of Droplet A. The flame-spread time is limited by the burning lifetime of Droplet A and about 80% of the burning lifetime of Droplet A under the near-flame-spread-limit condition. The flame-spread limit is discussed considering the burning lifetime of Droplet A, the thermal conduction time, and the heating time of Droplet L.