کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6632589 1424952 2018 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Microscopic and macroscopic characterization of spray impingement under flash boiling conditions with the application of split injection strategy
ترجمه فارسی عنوان
مشخصه میکروسکوپیک و ماکروسکوپیک تحت تاثیر قرار گرفتن در معرض جوش خوردگی اسپری با استفاده از استراتژی تزریق تقسیم
ترجمه چکیده
خصوصیات ضربه گیر میکروسکوپی و ماکروسکوپی یک جت واحد تحت شرایط مختلف جوش خوردگی مورد بررسی قرار گرفت. تأثیر استراتژی تزریق تقسیم شده و تعامل مربوط به تزریق تقسیم شده مورد بررسی قرار گرفت. توزیع غلظت سوخت در طی روند آسیب زدن نیز اندازه گیری شد. یافته شد که شرایط جوش غیر فلزی منجر به قطرات و رباط های بزرگ ثانویه می شود که منجر به مقدار زیاد سوخت مایع در سطح ضربه می شود. جوش فلزی افزایش یافته می تواند به طور موثر اندازه قطرات اولیه و قطرات ثانویه و سوخت حاصل از آن را کاهش دهد. اشتغال استراتژی تزریق تقسیم می تواند سوخت پایدار را کاهش دهد. تزریق انشعاب دوم، فیلم سوخت را سریعتر از تزریق اول به دلیل وجود سوخت سوخت ساخته شده توسط تزریق اول ساخته شده، با این حال، افزایش قدرت جوش فلزی باعث کاهش سرعت ساخت با بهبود پراکندگی و تبخیر. علاوه بر این، غلظت سوخت پایدار بر روی سطح به طور موثر می تواند توسط جوش افزایش یافته فلزی کاهش یابد و طول عمر سوخت متراکم با افزایش فاصله فاصله بین تزریق تقسیم شده کاهش می یابد.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی مهندسی شیمی (عمومی)
چکیده انگلیسی
Microscopic and macroscopic impingement characteristics of a single jet were investigated under various flash boiling conditions. The influences of split injection strategy and the related interaction between split injections were studied. The fuel concentration distribution during the impingement process was also quantified. It was found that non-flash boiling condition lead to large secondary droplets and ligaments, resulting in a large amount of liquid fuel deposited on the impact surface. The boosted flash boiling could effectively reduce the sizes of primary droplets and secondary droplets and the resultant deposited fuel. The employment of split injection strategy could further decrease the deposited fuel. The second split injection built up the fuel film more quickly than the first injection due to the existence of the built fuel film by the first injection, however, increasing flash boiling strength decreased the building-up rate by improving dispersion and evaporation. In addition, the concentration of the deposited fuel on the surface could effectively be reduced by enhanced flash boiling and the lifetime of dense fuel was shortened by increasing dwell interval between split injections.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Fuel - Volume 212, 15 January 2018, Pages 315-325
نویسندگان
, , , , ,