Coupled effect of coarse aggregate and micro-silica on the relation between strength and elasticity of high performance concrete

This paper examines the relation between strength and elastic modulus of high performance concrete (HPC) tailored from various heavy and normal weight aggregates coupled with the effect of micro-silica as a supplementary cementitious material (SCM). Elastic modulus of concrete is an important mechanical property and plays an important role for the calculation of deformations in the structural components. Experimentation was conducted in precise laboratory environment and all other parameters were kept constant in the mixtures. This investigation was prompted to supply the construction industry with appropriate information on how specific properties of HPC mixtures can be improved using local normal and heavy weight aggregates and incorporating supplementary cementitious materials. In other words, this paper will encourage the local aggregate consumption in mega projects that to be constructed for special purposes. In this investigation, dissimilar types of normal and heavy weight coarse aggregates were used. It was found that it is worthy to study experimentally the relation between strength and MOE of HPC when different types of coarse aggregates are used for an indicated HPC mixture with a corresponding combination of supplementary cementitious material. The comparison of experiment results with the ACI prediction models showed that the models should be enhanced for accurate prediction for the effect of aggregate type with and without the use of micro-silica as supplementary cementitious material. An assessment of the need for an aggregate and micro-silica based modification to the ACI models is also proposed. The experimental work conducted in this investigation confirmed that the type of aggregate and its combination with a supplementary cementitious material would have important influence on the HPC characteristics. Hence, the use of appropriate values for the strength-MOE relation for a HPC mixture based on the nature of used aggregates and SCM is recommended. However, such values might be not available in some cases, if so the experimental trend lines presented in this study can be used to calculate them.