کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
8109590 1522256 2018 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Cement sheath integrity of shale gas wells: A case study from the Sichuan Basin
ترجمه فارسی عنوان
یکپارچگی غلاف سیمان چاه های گاز شیل: مطالعه موردی از حوضه سیچوان
کلمات کلیدی
حوضچه سیچوان، گاز شیل، فشار عمیق پایدار، شکستگی هیدرولیکی، یکپارچگی غلاف سیمان، میکرو حلقه، تغییر شکل پلاستیک استحکام اتصال بتن مدول یانگ،
ترجمه چکیده
فشارهای حلقوی پایدار و تغییر شکل پوشش چاه های گاز در چندین منطقه تظاهرات گاز شیل در حوضه سیچوان شایع است. با توجه به این، شرایط تغییر فشار داخل چاه در روند حفاری مورد بررسی قرار گرفت و سپس یک مدل مکانیکی الاستیک-پلاستیک از سیستم سنگی اطراف غلاف سیمانی چدنی برای محاسبه کل روند تغییر فشار چاه در استرس - دولت کشوری تاسیس شد. با توجه به این مدل، تولید و توسعه میکرو حلقه ها در اینترفیس های اول و دوم تحت شرایط مختلف فشار داخلی مورد تجزیه و تحلیل قرار گرفت. سپس، همراه با داده های واقعی واقعی، محاسبه انجام شد. نتایج نشان می دهد که هیچ روند میکرویی در فرایند بارگیری تولید نمی شود، اما فشار داخلی لود شده تعیین درجه تغییر شکل پلاستیک غلاف سیمان را نشان می دهد. علاوه بر این، کاهش فشار داخلی در هنگام تخلیه باعث ایجاد تنش در رابط می شود که منجر به تولید میکرو حلقه می شود و در نتیجه تمامیت غلاف سیمان آسیب دیده است. در نهایت، عملکرد مکانیکی غلاف سیمان را می توان با بهینه سازی فرمول دیزل بهبود داد و از تکنولوژی های عملیاتی برای تضمین یکپارچگی غلاف سیمان در چاه های گاز شیل استفاده می شود. این مدل در 13 چاه برای آزمایشات میدانی اعمال شد. نشان داده شده است که میانگین کیفیت خوب بخش سیمانی کردن بخش افقی 92.67٪ است و 11 چاه که در تولید قرار داده شده تحت فشار سالم قرار نگرفته اند. نشان داده شده است که فشار حلقوی ثابت چاه های گاز در مناطق تظاهرات گاز شیل به طور موثر بهبود می یابد. این دستاورد تحقیقاتی می تواند به عنوان مرجع برای مدیریت یکپارچه غلاف سیمان در بلوک های مشابه مورد استفاده قرار گیرد.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی مهندسی انرژی و فناوری های برق
چکیده انگلیسی
Sustained annulus pressure and casing deformation of gas wells are common in several shale gas demonstration areas in the Sichuan Basin. In view of this, the conditions for pressure change inside the wellbore in the process of drilling were analyzed, and then an elastic-plastic mechanical model of casing-cement sheath-surrounding rock system for calculating the whole change process of wellbore pressure in the stress-strain state was established. By virtue of this model, the generation and development of micro-annulus at the first and second interfaces under various internal pressure conditions were analyzed. Then, combined with the actual field data, calculation was performed. Results show that no micro-annulus is generated in the process of loading, but the loaded internal pressure determines the plastic deformation degree of cement sheath. Besides, the decrease of internal pressure during the unloading exerts tension on the interface, leading to the generation of micro-annulus, and consequently the integrity of cement sheath is damaged. Finally, the mechanical performance of cement sheath can be improved by optimizing the slurry formula, and operation technologies are used to guarantee the integrity of cement sheath in shale gas wells. This model was applied in 13 wells for field tests. It is indicated that the average good quality rate of horizontal section cementing is 92.67%, and 11 wells which have been put into production are not subjected to sustained annulus pressure. It is demonstrated that the sustained annulus pressure of gas wells in shale gas demonstration areas is improved effectively. This research achievement can be used as a reference for integrity management of cement sheath in the similar blocks.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Natural Gas Industry B - Volume 5, Issue 1, February 2018, Pages 22-28
نویسندگان
, , , , , ,