Prediction of productivity of high energy gas-fractured oil wells

The use of fresh water as a fracturing fluid has limitations such as limited water availability in arid areas and negative impacts of water on oil and gas production in formations with high clay content. Alternatives to water for well fracturing include tailored energetic materials such as novel explosives. High energy gas fracturing (HEGF) creates radial fractures with fracture-orientations independent of formation stress anisotropy and heterogeneity. This eliminates the requirement of in-situ stress orientation for designing multi-hydraulic water-fracturing horizontal wells. Assuming uniformly distributed radial fractures around wellbore, an analytical well productivity model was derived in this study to predict productivity of HEGF-completed oil wells under pseudo steady state flow condition. Field case studies and sensitivity analyses were performed with the analytical model. Result of field case studies indicates that the analytical model over-predicts productivity of HEGF-completed wells by about 10%. Sensitivity analysis with the analytical model shows that the productivity of HEGF-completed wells reaches a maximum value at an optimal number of radial fractures around the wellbore. The productivity of the HEGF-completed wells increases non-linearly with fracture conductivity. But the benefit of increasing fracture conductivity levels out beyond fracture conductivity 2000 md-inch for the typical case investigated in this study.