Keywords: لبه ساخته شده; Micro milling; Micro tools; Built-up edge; Titanium alloy;
مقالات ISI لبه ساخته شده (ترجمه نشده)
مقالات زیر هنوز به فارسی ترجمه نشده اند.
در صورتی که به ترجمه آماده هر یک از مقالات زیر نیاز داشته باشید، می توانید سفارش دهید تا مترجمان با تجربه این مجموعه در اسرع وقت آن را برای شما ترجمه نمایند.
در صورتی که به ترجمه آماده هر یک از مقالات زیر نیاز داشته باشید، می توانید سفارش دهید تا مترجمان با تجربه این مجموعه در اسرع وقت آن را برای شما ترجمه نمایند.
Keywords: لبه ساخته شده; Built-up edge; Micromilling processes; Surface roughness estimation;
Keywords: لبه ساخته شده; FE modeling; Friction; Rake angle; Built-up edge;
Keywords: لبه ساخته شده; Machining; Local friction; Built-Up Edge; ALE-FE modelling;
Keywords: لبه ساخته شده; Cutting tools; Surface texturing; Built-up edge; Wear behaviour; Dry cutting;
Keywords: لبه ساخته شده; Built-up edge; Cutting tool insert; Metal cutting; Local microstructure analysis
Keywords: لبه ساخته شده; Duplex stainless steel; Machinability; Flute damage; Tool wear; Built-up edge;
Keywords: لبه ساخته شده; material combination; simultaneous machining; internal and external cooled cutting insert; notch wear; flank wear; built-up edge
Keywords: لبه ساخته شده; Cutting mechanism; Cutting stress field; Cutting temperature; Built-up edge; Particle image velocimetry
Microstructural aspects of the transition between two regimes in orthogonal cutting of AISI 1045 steel
Keywords: لبه ساخته شده; Machining; Cutting; Microstructure; Dynamic recrystallization; Built-up edge; AISI 1045;
Wear characteristics of polycrystalline diamond tools in orthogonal cutting of CFRP/Ti stacks
Keywords: لبه ساخته شده; BUE; built-up edge; CCD; charge coupled device; CFRP; carbon fiber reinforced polymer; EDS; energy-dispersive X-ray spectroscopy; HSS; high-speed steel; HV; Vickers hardness; PCD; polycrystalline diamond; SEM; scanning electron microscope; Ti; titanium; U
Investigating the influence of built-up edge on forces and surface roughness in micro scale orthogonal machining of titanium alloy Ti6Al4V
Keywords: لبه ساخته شده; Cutting; Micro machining; Built-up edge; Titanium alloy
Study on machinability of a stellite alloy with uncoated and coated carbide tools in turning
Keywords: لبه ساخته شده; Stellite alloys; Coated carbide; Uncoated carbide; Tool life; Built-up edge; Wear mechanisms
Analysis of the evolution of the Built-Up Edge and Built-Up Layer formation mechanisms in the dry turning of aeronautical aluminium alloys
Keywords: لبه ساخته شده; Built-Up Edge; BUE; Built-Up Layer; BUL; Dry turning; Aluminium alloys;
Thermal and mechanical modeling analysis of laser-assisted micro-milling of difficult-to-machine alloys
Keywords: لبه ساخته شده; Laser-assisted micro-milling; Thermal analysis; Finite element; Surface integrity; Tool wear; Built-up edge
The influence of feed rate and cutting speed on the cutting forces, surface roughness and tool–chip contact length during face milling
Keywords: لبه ساخته شده; Cutting forces; Cutting speed; Feed rate; Built-up edge; Surface roughness
Development of a new and simple quick-stop device for the study on chip formation
Keywords: لبه ساخته شده; Quick-stop device; Chip formation; Orthogonal cutting; Built-up edge;
Wear behaviour of cemented carbide tools in dry machining of aluminium alloy
Keywords: لبه ساخته شده; Dry machining; FEM simulation; Tool wear; Built-up edge; Built-up layer; Diffusion;
Slip-line modeling of built-up edge formation in machining
Keywords: لبه ساخته شده; Built-up edge; Slip-line; Machining; Tool-chip friction; Cutting forces;