Quantitative characterization of three-dimensional pore structure in hardened cement paste using X-ray microtomography combined with centrifuge driven metal alloy intrusion

In this paper, a centrifuge device is proposed to facilitate the intrusion of a low-melting point metal alloy into the pore space of hardened cement paste. X-ray microtomography is combined with metal centrifugation porosimetry (MCP) to quantitatively investigate 3D pore structure. The low-melting-point metal alloy is melted and introduced into pore space in pastes with water cement ratio of 0.5 and 1.0 at a temperature of 65 °C. 3D pore structure is quantitatively analyzed by X-ray microtomography after the molten metal alloy has been consolidated. A new threshold value segmentation method for pore space was proposed using conversion coefficient on region of interest (ROI). Porosity and pore size distribution are tested by MCP and compared with the results based on mercury intrusion porosimetry (MIP). The results show that the contrast between pore space and solid phase in the X-ray microtomography device image is improved. The total porosity obtained by MCP was found to be consistent with the results obtained by MIP.