Flexible large area polymer solar cells based on poly(3-hexylthiophene)/fullerene

Photovoltaic devices based on regioregular poly(3-hexylthiophene) (P3HT) and ([6,6]-phenyl-C61-butyric acid methyl ester) (PCBM) were fabricated and characterized using 5×5 cm ITO polyester foils with an active cell area of 0.5×0.5 cm2. The HOMO/LUMO of P3HT and PCBM were estimated from cyclic voltammetry data. The complete quenching of photoluminescence of P3HT after mixing with PCBM indicates an effective charge transfer from P3HT to PCBM. The absorption spectrum of a blend (1:3 wt%) of both components shows that there is no ground state doping. Following device parameters without any special postproduction treatment were determined: VOC=600 mV, ISC=6.61 mA/cm2, FF=0.39 and ηAM1.5 (PIN:100 mW/cm2)=1.54%.