Article ID Journal Published Year Pages File Type
10262533 Chemical Engineering Science 2011 9 Pages PDF
Abstract
In the past decade, foundations have been laid for understanding the lift generation in a soft porous medium under rapid compaction (Feng and Weinbaum, 2000. Journal of Fluid Mechanics 422, 282-317; Wu et al., 2005b. Journal of Fluid Mechanics 542, 281-304; Wu et al., 2004a. Physical Review Letters 93(19), 194501; Barabadi et al., 2009. Journal of Heat Transfer 131(10), 101006-1-101006-12; Al-Chidiac et al., 2009. Journal of Porous Media 12(11), 1019-1035). One of the key parameters that affects the lift generation is the variation of the Darcy permeability as a function of compression. This critical problem is investigated in the current study using a novel experimental setup, namely a permeameter. Three different, soft, synthetic, fibrous, porous materials were chosen for the study. Their microstructures were characterized using a scanning electron microscope and a stereomicroscope. Their porosities were precisely measured using a water displacement method. By carefully controlling the air flow through the materials contained in a long Plexiglas tube of the permeameter, one obtained consistent results for the Darcy permeability of the tested material as a function of its porosity. Fluffing the porous materials caused disturbance of their microstructures thus variations in the permeability, especially in the high porosity range. The experimental data was curve-fitted and compared to established expressions. It showed that the Nogai Expression (Nogai and Ihara, 1978. Journal of Textile Machinery Society of Japan 31(12), T166-T170) provided the best fit for the change of permeability as a function of compression for the fibrous materials studied herein. The Carman-Kozeny equation, however, is only applicable for one of the fibrous materials. This finding is consistent with the theoretical predictions by Barabadi et al. (2009).
Related Topics
Physical Sciences and Engineering Chemical Engineering Chemical Engineering (General)
Authors
, , , ,