Article ID Journal Published Year Pages File Type
10288566 Geotextiles and Geomembranes 2014 11 Pages PDF
Abstract
The pullout test is one of the methods commonly used to study pullout behavior of reinforcements. In the current research, large pullout tests (i.e. 100 × 60 × 60 cm) have been conducted to investigate the possibility of pullout resistance enhancement of clays reinforced with HDPE geogrid embedded in thin layers of sand. Pullout tests on clay-geogrid, sand-geogrid and clay-sand-geogrid samples have been conducted at normal pressures of 25, 50 and 100 kPa. Numerical modeling using finite element method has also been used to assess the adequacy of the box and geogrid sizes to minimize boundary and scale effects. Experimental results show that provision of thin sand layers around the reinforcement substantially enhances pullout resistance of clay soil under monotonic loading conditions and the effectiveness increases with increase in normal pressures. The improvement is more pronounced at higher normal pressures and an optimum sand layer thickness of 8 cm has been determined for maximum enhancement. Results of numerical analysis showed the adequacy of the box and geogrid length adopted as well as a relatively good agreement with experimental results.
Related Topics
Physical Sciences and Engineering Earth and Planetary Sciences Geotechnical Engineering and Engineering Geology
Authors
, ,