Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
10384601 | Tribology International | 2005 | 6 Pages |
Abstract
Recently, material of Inconel 690TT (thermal treatment) for the steam generator tubes in a nuclear power plant was substituted for the existing material of Inconel 600HTMA (high temperature mill-annealing). Inconel 690TT has more chromium than Inconel 600HTMA in order to improve the corrosion resistance. In this study, to evaluate the friction and wear characteristics of Inconel 690TT under fretting condition, the fretting tests as well as sliding tests were carried out in air and in elevated temperature water environment, respectively. Fretting tests of the cross-cylinder type were done under various applied normal loads, and sliding tests of pin-on-disk type were also carried out to compare with the results of the fretting test. In summary, the results of the fretting tests correlated with the results of the sliding tests. The wear mechanism of Inconel 690TT in air was delamination wear and the mechanism in water was affected by micro-pitting. Also, it was found that the fretting wear coefficients in water were increased with increase in the temperature of water.
Related Topics
Physical Sciences and Engineering
Chemical Engineering
Colloid and Surface Chemistry
Authors
Sung-Hoon Jeong, Chung-Woo Cho, Young-Ze Lee,