Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
10389728 | Separation and Purification Technology | 2015 | 33 Pages |
Abstract
A two-step method to understand the dust particle capture process in a magnetic field gradient was presented in this study. Dust capture depended strongly on the magnetic force exerting on the particles, which imply large particle size, slow flow velocity and large magnetic field gradients would increase the deposition. Aggregates of sub-micron particles observed in the captured dust sample were composed mainly of iron compounds. Low velocity was beneficial for capture of 1 μm particles, while high velocity facilitated the capture of larger particles (⩾2.5 μm). Complex weaving aided the particle collection in a relatively low flow field while simple weaving was more favorable at higher flows. Predictions of the magnetic capture efficiency of the entire filter were established qualitatively and quantitatively based on a subdomain simulation employing a cubic structure. Wire magnetization is useful for small particles with a fine filter, while relatively large particles such as 10 μm and 2.5 μm were good for medium and coarse mesh filters. Investigation of screen mesh weaving and the distance between magnets provided an optimum filter screen configuration and optimum operating parameters. The experimental results agreed quite well with the simulation work.
Related Topics
Physical Sciences and Engineering
Chemical Engineering
Filtration and Separation
Authors
Shan Huang, Xingming Zhang, Masamoto Tafu, Takeshi Toshima, Youngmin Jo,