| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 10407614 | Measurement | 2013 | 17 Pages |
Abstract
⺠Machinability study in hard turning using inexpensive coated carbide insert. ⺠Inappropriate selection of process parameter may cause excessive tool wear and surface roughness. ⺠RSM model proposed are statistically significant and adequate for flank wear and surface roughness. ⺠The optimal parametric combination is d1-f1-v3 and improvement of GRG is found to be 0.3093. ⺠Measured tool life at optimal level has been found to be 47 min and machining cost per part is only Rs. 3.17.
Related Topics
Physical Sciences and Engineering
Engineering
Control and Systems Engineering
Authors
Ashok Kumar Sahoo, Bidyadhar Sahoo,