Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
10409483 | Optics & Laser Technology | 2016 | 8 Pages |
Abstract
Ni60-hBN composite coatings with varying hBN content were prepared on Ti6Al4V substrates by laser cladding. The composite coatings with no cracks and few pores are bonded metallurgically with the substrates. The phase composition and microstructure of the composite coatings were investigated. The tribological properties of the composite coatings were evaluated under dry sliding wear test conditions at 20 °C, 300 °C and 600 °C, respectively. The microhardness gradually increased from the bottom to the top of the coating and increased with increasing of hBN content. The laser clad Ni60-10%hBN coating exhibits excellent tribological behavior at high temperatures (300 °C and 600 °C).
Related Topics
Physical Sciences and Engineering
Engineering
Electrical and Electronic Engineering
Authors
Xiao-Long Lu, Xiu-Bo Liu, Peng-Cheng Yu, Shi-Jie Qiao, Yong-Jie Zhai, Ming-Di Wang, Yao Chen, Dong Xu,