Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1052864 | Environmental Impact Assessment Review | 2012 | 7 Pages |
The construction industry is one of the greatest sources of pollution because of the high level of energy consumption during its life cycle. In addition to using energy while constructing a building, several systems also use power while the building is operating, especially the air-conditioning system. Energy consumption for this system is related, among other issues, to external air temperature and the required internal temperature of the building. The façades are elements which present the highest level of ambient heat transfer from the outside to the inside of tall buildings. Thus, the type of façade has an influence on energy consumption during the building life cycle and, consequently, contributes to buildings' CO2 emissions, because these emissions are directly connected to energy consumption. Therefore, the aim is to help develop a methodology for evaluating CO2 emissions generated during the life cycle of office building façades. The results, based on the parameters used in this study, show that façades using structural glazing and uncolored glass emit the most CO2 throughout their life cycle, followed by brick façades covered with compound aluminum panels or ACM (Aluminum Composite Material), façades using structural glazing and reflective glass and brick façades with plaster coating. On the other hand, the typology of façade that emits less CO2 is brickwork and mortar because its thermal barrier is better than structural glazing façade and materials used to produce this façade are better than brickwork and ACM. Finally, an uncertainty analysis was conducted to verify the accuracy of the results attained.
► We develop a methodology for evaluating CO2 emissions generated during the life cycle of office building façades. ► This methodology is based in LCA. ► We use an uncertainty analysis to verify the accuracy of the results attained. ► We study three typologies of façades. ► Façades using structural glazing and uncolored glass emit the most CO2 throughout their life cycle.