Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1055324 | Journal of Environmental Management | 2016 | 13 Pages |
•Biocomposite was prepared from bentonite and E. japonica seed powder.•Biocomposite was used for copper adsorption and process variables were optimized.•Isotherms, kinetics, thermodynamics and desorption studies were performed.•Biocomposite affinity for copper was excellent versus native biomass and bentonite.
Adsorption techniques are widely used to remove pollutants from wastewater; however, composites are gaining more importance due to their excellent adsorption properties. Bentonite composite with Eriobotrya japonica seed was prepared and used for the adsorption of copper (Cu) metal from aqueous media. The process variables such as pH, Cu(II) ions initial concentration, adsorbent dose, contact time and temperature were optimized for maximum Cu(II) adsorption. At pH 5, adsorbent dose 0.1 g, contact time 45 min, Cu(II) ions initial concentration 75 mg/L and temperature 45 °C, maximum Cu(II) adsorption was achieved. Desorption studies revealed that biocomposite is recyclable. Langmuir, Freundlich and Harkins-Jura isotherms as well as pseudo-first and pseudo-second–order kinetics models were applied to understand the adsorption mechanism. Thermodynamic parameters (ΔG0, ΔH0 and ΔS0) suggest that the adsorption process was spontaneous and endothermic in nature. The pseudo-second-order kinetic model and Langmuir isotherm fitted well to the adsorption data. Results showed that biocomposite was more efficient for Cu(II) adsorption in comparison to individuals native Eriobotrya japonica seed biomass and Na-bentonite.
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slide