Electrocatalytic oxidation and detection of hydrazine at gold electrode modified with iron phthalocyanine complex linked to mercaptopyridine self-assembled monolayer

Electrocatalytic oxidation and detection of hydrazine in pH 7.0 conditions were studied by using gold electrode modified with self-assembled monolayer (SAM) films of iron phthalocyanine (FePc) complex axially ligated to a preformed 4-mercaptopyridine SAMs. The anodic oxidation of hydrazine in neutral pH conditions with FePc-linked-mercaptopyridine-SAM-modified gold electrode occurred at low overpotential (0.35 V versus Ag|AgCl) and the treatment of the voltammetric data showed that it was a pure diffusion-controlled reaction with the involvement of one electron in the rate-determining step. The mechanism for the interaction of hydrazine with the FePc-SAM is proposed to involve the Fe(III)Pc/Fe(II)Pc redox process. Using cyclic voltammetry (CV) and Osteryoung square wave voltammetry (OSWV), hydrazine was detected over a linear concentration range of 1.3 × 10−5 to 9.2 × 10−5 mol/L with low limits of detection (ca. 5 and 11 μM for OSWV and CV, respectively). At concentrations higher than 1.2 × 10−4 mol/L the anodic peak potential shifted to 0.40 V (versus Ag|AgCl), and this was interpreted to be due to kinetic limitations resulting from the saturation of hydrazine and its oxidation products onto the redox-active monolayer film. This type of metallophthalocyanine-SAM-based electrode is a highly promising electrochemical sensor given its ease of fabrication, good catalytic activity, stability, sensitivity and simplicity.