Delayed ettringite formation symptoms on mortars induced by high temperature due to cement heat of hydration or late thermal cycle

Cases of delayed ettringite formation (DEF) have mainly been detected on mortars or precast concretes steam-cured according to a predefined temperature cycle during hydration. The present study shows that other situations in which the material is submitted to a temperature cycle can induce DEF expansions. Mortar bars were made with three different cements (types 10, 20M, and 30). As a first heat treatment, the mortar bars were steam-cured to reproduce the temperature cycle they would undergo if they were at the center of a large mortar member. The dimensional variations of these specimens were studied for 1 year. After 1 year, half of the specimens were steam-cured for 1 month at 85 °C. The expansions were followed for two more years. The early-age steam-cure-induced expansions for mortar types 10 and 30. Late steam-curing induced expansions for the three cements tested. In one case (cement type 20M), the early-age steam cure has suppressed or delayed the expansion induced by the late steam cure. A scanning electron microscopy (SEM) study showed that typical DEF symptoms are associated with the expansions.