A parametric imaging approach for the segmentation of ultrasound data

The acoustical features are calculated locally on a sliding window. This procedure allows to built parametric mapping representing the particular characteristics of the medium. To test the influence of the acoustical parameters in the segmentation process, a set of numerical phantoms has been computed using the Field software developed by J.A. Jensen. Each phantom consists in two regions with two different acoustical properties: the density of scatterers and the scattering amplitude. From both the simulated RF signals and envelope images, the parameters have been computed; their relevance to represent a particular characteristic of the medium is evaluated. The segmentation has been processed for each phantom. The ability of each parameter to improve the segmentation results is validated. A agar-gel phantom has also been created, in order to test the accuracy of the parameters in conditions closer to the in vivo ultrasound imaging. This phantom contains four inclusions with different concentrations of silica. A B&K ultrasound device provides the RF data. The quantification of the segmentation quality is based on the rate of correctly classified pixels and it has been computed for all the parameters either from the field images or the phantom images. The large improvement in the segmentation results obtained reveals that the multiparametric segmentation scheme proposed in this study can be a reliable tool for the processing of noisy ultrasound data.