Some more new etchants for CR-39 detector

Recently, several new etchants have been reported for CR-39 detector (Molten Ba(OH)2. 8H2O as an etchant for CR-39 detector, Radiat. Meas. 37 (2003) 205; Discovery of new etchants for CR-39 detector, Radiat. Meas. (2004)). We have made further progress in this direction and have unveiled two more new etchants which are reported in this article. CR-39 detectors were irradiated with fission fragments and alpha particles from a thin 252Cf disc source. The irradiated detectors were then etched in our newly introduced etching solutions as well as in conventionally used 6 M NaOH aqueous solution at 70 ∘C. The newly prepared etching solutions included NaOH dissolved in methanol and NaOH dissolved in methanol + water. Optimum values of NaOH concentration in methanol as well as in methanol + water were determined. Optimum etching temperatures were also determined for both the above-mentioned etchants. From fission and alpha track diameters, bulk etching rate (VB), track etching rate (VT) and etching efficiency (η) were determined and compared with that obtained for 6 M NaOH at 70 ∘C. Both the newly introduced etchants were found more efficient than the conventionally used 6 M aqueous NaOH (64%) at 70 ∘C and have relatively much smaller etching time.