Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
11001254 | Soil Dynamics and Earthquake Engineering | 2018 | 13 Pages |
Abstract
This paper presents a description of testing procedure and results of the LEAP-GWU-2015, and an investigation of the effect of the radial gravity field in centrifuge modelling. Dynamic responses of two models are compared. One had a planar surface with a 5° slope relative to the base of the container; the other had a curved surface to maintain a constant slope angle with respect to the radial g-field. For the centrifuge tests employed in this study, the slope and base excitation are in the tangential direction to spinning centrifuge. Results show that spikes in acceleration records due to cyclic mobility associated with lateral displacements appeared on both models. However, for the plane surface model, acceleration spikes in the negative (upslope) direction are more prominent and the residual downslope ground deformation was larger. Larger lateral displacement was observed in the plane model, while surface displacements in the curved model are smaller and uniform along the length of the model. For the plane model, the radial gravity acting near the slope top is almost constant and gradually increases towards the slope toe which causes a net increase in effective slope angle. Through the comparison the importance of curving the model ground surface is recognized as leading to uniform lateral displacements along the length of the model surface.
Keywords
Related Topics
Physical Sciences and Engineering
Earth and Planetary Sciences
Geotechnical Engineering and Engineering Geology
Authors
Tetsuo Tobita, Takayuki Ashino, Jianfei Ren, Susumu Iai,