Aero engine compressor cooling by water injection - Part 2: Performance and emission reductions

The 2 and 3-spool engine models investigated demonstrated significant reductions in compressor discharge and turbine inlet temperatures due to water injection. In this condition, the rotational speeds of the compressors are seen to be reduced to counter the mass flow augmenting effect of water injection and to satisfy the fixed thrust constraint. This along with lower compressor specific work brings about an improvement in the specific fuel consumption (5.3% and 7.8%, respectively) and general performance at low and high ambient temperatures. A higher advantage was seen for the 3-spool engine over the 2-spool as shown. Significant reductions in Nitrogen Oxide emissions of over to 50% are also demonstrated.