Article ID Journal Published Year Pages File Type
1197179 Journal of Analytical and Applied Pyrolysis 2013 8 Pages PDF
Abstract

The effect of different inlet hydrocarbon concentrations (10,000, 20,000 and 30,000 ppmv) and reaction temperatures (873–1323 K) on PAH and soot formation from acetylene pyrolysis has been studied. 16 PAH considered by Environmental Protection Agency (EPA) as priority pollutants, together with light gases present at the outlet gas stream, have been quantified. Soot formed was collected on a filter at the reactor outlet. PAH found in the different phases (at the gas phase, adsorbed on soot, and/or stuck on reactor walls) were analysed by means of gas chromatography–mass spectrometry (GC–MS). Increasing fuel concentration and reaction temperature resulted in the increase in soot production together with decrease in the light gases at the reactor outlet. The acetylene conversion and the hydrogen concentration increased with the temperature, whereas benzene and the total PAH quantified showed a maximum around 1123 and 1223 K, respectively. In all cases, the concentration of products such as hydrogen, benzene, PAH and soot at the reactor outlet and the acetylene conversion increased with the reactant concentration. The temperature, at which the benzene showed a maximum concentration, was similar to the temperature where soot and PAH started to be formed. This suggests that benzene consumption leads to form PAH, which subsequently form soot, by following the well-known HACA (hydrogen abstraction/acetylene addition) mechanism.

► This work studies the effect of fuel concentration and reaction temperature on soot and PAH formation as well as the light gases produced. ► 16 PAH, considered as priority pollutants, were quantified by using Soxhlet extraction and gas chromatography-mass spectrometry. ► Increasing reaction temperature and fuel concentration resulted in the increase in soot yield together with the decrease in the light gases. ► The PAH exhibited a maximum concentration in the range of temperature considered.

Related Topics
Physical Sciences and Engineering Chemistry Analytical Chemistry
Authors
, , , ,