| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1199074 | Journal of Chromatography A | 2014 | 10 Pages |
•Two hybrid monoliths were prepared by different polymerization techniques.•Two hybrid monoliths were investigated on the morphology and chromatographic assessment.•Both hybrid monoliths showed satisfactory tailorability.
Two kinds of hybrid monolithic columns were prepared by using methacrylate epoxy cyclosiloxane (epoxy-MA) as functional monomer, containing three epoxy moieties and one methacrylate group. One column was in situ fabricated by ring-opening polymerization of epoxy-MA and 1,10-diaminodecane (DAD) using a porogenic system consisting of isopropanol (IPA), H2O and ethanol at 65 °C for 12 h. The other was prepared by free radical polymerization of epoxy-MA and ethylene dimethacrylate (EDMA) using 1-propanol and 1,4-butanediol as the porogenic solvents at 60 °C for 12 h. Two hybrid monoliths were investigated on the morphology and chromatographic assessment. Although two kinds of monolithic columns were prepared with epoxy-MA, their morphologies looked rather different. It could be found that the epoxy-MA–DAD monolith possessed higher column efficiencies (25,000–34,000 plates/m) for the separation of alkylbenzenes than the epoxy-MA–EDMA monolith (12,000–13,000 plates/m) in reversed-phase nano-liquid chromatography (nano-LC). Depending on the remaining epoxy or methacrylate groups on the surface of two pristine monoliths, the epoxy-MA–EDMA monolith could be easily modified with 1-octadecylamine (ODA) via ring-opening reaction, while the epoxy-MA–DAD monolith could be modified with stearyl methacrylate (SMA) via free radical reaction. The chromatographic performance for the separation of alkylbenzenes on SMA-modified epoxy-MA–DAD monolith was remarkably improved (42,000-54,000 plates/m) when compared with that on pristine epoxy-MA–DAD monolith, while it was not obviously enhanced on ODA-modified epoxy-MA–EDMA monolith when compared with that on pristine epoxy-MA–EDMA monolith. The enhancement of the column efficiency of epoxy-MA–DAD monolith after modification might be ascribed to the decreased mass-transfer resistence. The two kinds of hybrid monoliths were also applied for separations of six phenols and seven basic compounds in nano-LC.
