Development of capillary electrochromatography with poly(styrene-divinylbenzene-vinylbenzenesulfonic acid) monolith as the stationary phase

A new polystyrene-based monolithic stationary phase, which was prepared by single step in situ copolymerization of styrene, divinylbenzene and vinylbenzenesulfonic acid (VBSA), was developed as a separation column for capillary electrochromatography, in which VBSA was employed as the charge-bearing monomer. Polymerization time of the polystyrene-based monolith had slightly influenced the separation time of the tested analytes, but it effectively altered their separation resolutions. Furthermore, baseline separation for a wider range of acetonitrile levels of mobile phase was achieved when a monolithic column prepared by a longer polymerization time was used. This novel polystyrene-based monolithic column provided an adequate electroosmotic flow either in basic or acidic mobile phase when VBSA level was maintained at 2.6% (w/w). Finally, this proposed polystyrene-based column allowed seven tested analytes to achieve a reproducible baseline separation within 2.2 min with theoretical plate numbers higher than 164 000 plates/m.