Retention divergence of terpenes with porous graphitized carbon and C18 stationary phases

The significant divergence between the retention of 16 terpene standards on porous graphitized carbon (PGC) and C18 packing materials are illustrated. The PGC surface is shown to provide a selectivity toward shape, polarity, and structure that is not afforded by the C18 surface. This observation is illustrated by plots of the retention factors similar to those typically used to represent 2D-HPLC separations. A geometric approach to factor analysis was used to measure the separation divergence together with the selectivity and the product selectivity factors of closely related species. When a methanol mobile phase was used with the PGC surface, a large fraction of the separation space could be utilized. That is further reflected by a spreading angle of 80.3°. The PGC material was also successful at resolving structural isomers where the C18 phase was not. It was also found that the choice of the mobile phase is important when using this material. A much larger degree of space utilization was seen with methanol than with acetonitrile that displayed a spreading angle of only 40.8°.

► The retention factors of 16 terpenes on porous graphitized carbon were measured. ► The retention factors of these compounds were also measured on a C18 stationary phase. ► The elution patterns are different enough to allow the use of these columns in 2DLC. ► GAFA and a parameter derived from separation factors characterize phase orthogonality.