Structural identification and characterization of potential impurities of pantoprazole sodium1

Six impurities in pantoprazole sodium bulk drug substance were detected by a simple high performance liquid chromatographic method (HPLC) whose area percentage ranged from ∼0.05 to 0.34%. Liquid chromatography–mass spectrometry (LC–MS) was performed to identify the molecular weight of the impurities. A thorough study was undertaken to characterize these impurities. These impurities were synthesized, subsequently characterized and were co-injected with the sample containing impurities and found the retention time match of the spiked impurities. Based on their spectral data (IR, NMR and MS), these impurities were characterized as; 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl]thio]-1H-benzimidazole (Impurity-I); 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl]sulfonyl]-1H-benzimidazole (Impurity-II); 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-1-oxide-2-pyridinyl)methyl]sulfonyl]-1H-benzimidazole (Impurity-III); 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl]thio]-1-((3,4-dimethoxy-2-pyridinyl)methyl)-1H-benzimidazole (Impurity-IV); 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl]sulfinyl]-1-((3,4-dimethoxy-2-pyridinyl)methyl)-1H-benzimidazole (Impurity-V); 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-1-oxide-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole (Impurity-VI). The formation of these impurities was proposed. The structure of the Impurity-II was unambiguously confirmed by single crystal X-ray diffraction (XRD) studies.