Article ID Journal Published Year Pages File Type
1239587 Spectrochimica Acta Part B: Atomic Spectroscopy 2015 7 Pages PDF
Abstract

•Ir, Ru and Zr were investigated as permanent modifiers.•Ca, Mg, Pd and Pd/Mg were investigated as modifiers in solution.•Indirect determination of sulfur monitoring the molecular absorbance of the CS•Direct analysis of diesel samples using a dilution in propan-1-ol.

High-resolution continuum source graphite furnace molecular absorption spectrometry has been applied for sulfur determination in diesel fuel. The sharp rotational lines of the carbon monosulfide molecule (formed during the vaporization step) were used to measure the absorbance. The analytical line at 258.056 nm was monitored using the sum of three pixels. Different chemical modifiers were investigated and the mixture of palladium and magnesium was used as chemical modifier in combination with iridium as permanent modifier. l-Cysteine was chosen as sulfur standard and the calibration was done against aqueous standard solutions. The proposed method was applied for the analyses of four diesel samples: two S10 samples and two S500 samples. The trueness of the method was checked with a certified reference material (CRM) of sulfur in diesel fuel (NIST 2724b). Accurate results, for samples and CRM, were achieved after a dilution with propan-1-ol. The following figures of merit were obtained: characteristic mass of 17 ± 3 ng, limit of detection and limit of quantification of 1.4 mg kg− 1 and 4.7 mg kg− 1, respectively.

Related Topics
Physical Sciences and Engineering Chemistry Analytical Chemistry
Authors
, , , , ,