Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1239858 | Spectrochimica Acta Part B: Atomic Spectroscopy | 2013 | 8 Pages |
Microwave-induced combustion (MIC) was applied for analyte volatilization from soil and subsequent determination of As, Cd and Pb by inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma optical emission spectrometry (ICP-OES), and Hg by cold vapor generation inductively coupled plasma mass spectrometry (CVG-ICP-MS). Soil samples (up to 300 mg) were mixed with microcrystalline cellulose, pressed as pellets and combusted in closed quartz vessels pressurized with 20 bar O2. Analytes were volatilized from soil during combustion and quantitatively absorbed in a suitable solution: nitric acid (1, 2, 4 or 6 mol L− 1) or a solution of nitric (2 mol L− 1) and hydrochloric (1, 2 or 4 mol L− 1) acids. Accuracy was evaluated using certified reference materials of soil (NIST 2709, San Joaquin Soil) and sediment (SUD-1, Sudbury sediment for trace elements). Agreement with certified values was better than 95% (t-test, 95% confidence level) for all analytes when 6 mL of a solution of 2 mol L− 1 HNO3 and 2 mol L− 1 HCl was used with a reflux step of 5 min. The limit of detection was 0.010, 0.002, 0.009 and 0.012 μg g− 1 for As, Cd, Hg and Pb, respectively using ICP-MS determination. A clear advantage of the proposed method over classical approaches is that only diluted solution is used. Moreover, a complete separation of the analytes from matrix is achieved minimizing potential interferences in ICP-MS or ICP-OES determination. Up to eight samples can be digested in a single run of only 25 min, resulting in a solution suitable for the determination of all analytes by both techniques.
► Microwave-induced combustion method was applied for soil samples. ► Analytes were volatilized during MIC allowing a suitable separation from matrix. ► Matrix interferences during the determination step are minimized. ► As, Cd, Hg and Pb were determined by ICP-MS. ► Diluted acid solutions were used for quantitative analyte absorption.